To check the thickness, insert a straight pin into the wall.
Step 1: Decide which patterns you want to use, and trace the design onto tracing paper. Step 3: To transfer the patterns to the pumpkin, use a pushpin, corsage pin or the tip of the poker tool to poke holes through the paper and into the pumpkin along the design lines about 1/16 inch to 1/8 inch apart.
Step 8: If candle smoke blackens the lid, cut a chimney hole in the lid top to vent the smoke and heat and preserve your design.
Step 1: Mark a dot design using a template or straight edge.
Carving a pumpkin isn’t rocket science, but it’s still wise to have a game plan.
Usmc General Officer Assignments - Process Essay On How To Carve A Pumpkin
Before you lop off the top of that pumpkin and grab a handful of gooey squash guts, take a look through our basic guide to carving the best Halloween pumpkin.
Step 2: Drill dot holes with electric screw-driver or cut out design with knife.
Step 3: Place candle inside pumpkin and secure to bottom with hot wax.
If using the latter, simply cut down one side of the grocery bag, then cut off the base of the bag so you have a big rectangle of brown paper.
Layer a few of these on the table and you’re good to go.